Télécharger Imprimer la page

Bosch Professional GDS 18V-1000 Notice Originale page 10

Visseuse à choc sans-fil
Masquer les pouces Voir aussi pour Professional GDS 18V-1000:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15
10 | English
Cordless Impact Wrench
Permitted ambient temperat-
ure during operation and dur-
ing storage
Compatible rechargeable bat-
teries
Recommended batteries for
full perfomance
Recommended chargers
Data transfer
C)
Bluetooth®
Signal interval
D)
Max. signal range
A) Measured at 20−25 °C with rechargeable battery ProCORE18V 8.0Ah.
B) Measured with GBA 18V 1.5Ah and GBA 18V 12Ah.
C) The mobile terminal devices must be compatible with Bluetooth® Low Energy devices (version 4.1) and support the Generic Access Profile
(GAP).
D) The signal range may vary greatly depending on external conditions, including the receiving device used. The Bluetooth® range may be signi-
ficantly weaker inside closed rooms and through metallic barriers (e.g. walls, shelving units, cases, etc.).
Noise/Vibration Information
Noise emission values determined according to EN 62841-2-2.
Typically, the A-weighted noise level of the power tool is
Sound pressure level
Sound power level
Uncertainty K
Wear hearing protection!
Vibration total values a
(triax vector sum) and uncertainty K determined according to EN 62841-2-2:
h
Impact tightening of fasteners of the maximum capacity of the tool
a
h
K
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
1 609 92A 6HV | (10.05.2021)
GDS 18V-1000
GDS 18V-1050 H
°C
–20 to +50
GBA 18V...
ProCORE18V...
ProCORE18V...
≥ 5.5 Ah
GAL 18...
GAX 18...
GAL 36...
s
m
GDS 18V-1000
GDS 18V-1050 H
dB(A)
91
dB(A)
102
dB
3
2
m/s
12
2
m/s
1.5
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Assembly
u
GDS 18V-1000 C GDS 18V-1050 HC
–20 to +50
–20 to +50
GBA 18V...
GBA 18V...
ProCORE18V...
ProCORE18V...
ProCORE18V...
ProCORE18V...
≥ 5.5 Ah
≥ 5.5 Ah
GAL 18...
GAL 18...
GAX 18...
GAX 18...
GAL 36...
GAL 36...
Bluetooth® 4.1
(Low Energy)
GDS 18V-1000 C GDS 18V-1050 HC
95
106
3
13
13.5
1.5
Remove the battery from the power tool before carry-
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
–20 to +50
GBA 18V...
ProCORE18V...
ProCORE18V...
≥ 5.5 Ah
GAL 18...
GAX 18...
GAL 36...
Bluetooth® 4.1
(Low Energy)
8
8
30
30
95
95
106
106
3
3
13.5
1.5
1.5
Bosch Power Tools

Publicité

loading