Bakers Pride Y600 Serie Mode D'emploi page 2

FLOOR MODEL GAS DECK OVENS
Series:
Y600 and Y800
All gas operated Bakers Pride
for use with the type of gas specified on the rating plate
and for installation will be in accordance with National
Fuel Gas Code ANSI Z223.1 (latest edition).
Please retain this manual for future references.
WARNING
FOR YOUR SAFETY: Do not store or use gasoline
or other flammable vapors or liquids in the vicinity
of this or any other appliance.
WARNING
IMPORTANT INSTRUCTIONS: After the gas
supply has been connected to your unit, it is
extremely important to check piping for possible
leaks. To do this, use soap and water solution or
solutions that are expressly made for this purpose.
DO NOT USE matches, candles, flames, or other
sources of ignition since these methods are
extremely dangerous. Post in a prominent location
instructions to be followed in the event you smell
gas. Obtain these instructions from your local gas
supplier.
NOTICE
Only Pizza or Bread can have direct contact with
Fibrament decks. All other food products must
be placed in a pan or container to avoid direct
contact with ceramic decks.
Phone: 800.527.2100 | Fax: 914.576.0605 | www.bakerspride.com
FLOOR MODEL GAS DECK OVEN OPERATION MANUAL
deck ovens are intended
®
BAKERS PRIDE OVEN COMPANY, LLC.
1307 N. Watters Rd., Suite 180
Allen, TX 75013
CAUTION
Improper installation, adjustment, alteration,
service or maintenance can cause property
damage, injury or death. Read the installation,
operating and maintenance instructions
thoroughly before installing or servicing this
equipment.
NOTICE
Instructions to be followed in the event the user
smells gas must be posted in a prominent location
in the kitchen area. This information shall be
obtained from the local gas supplier.
WARNING
California Residents Only
WARNING: This product can expose you to
chemicals including chromium which is known to
the State of California to cause cancer and birth
defects or other reproductive harm. For more
information go to www.P65Warnings.ca.gov.
This equipment is design engineered for commercial
use only.
P/N U4282A REV B 03/2021