Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION / CONNECTION
Installing the unit (in-dash mounting)
When installing without the mounting sleeve
1
Remove the mounting sleeve and trim plate from
the unit.
2
Align the holes in the unit (on both sides) with the
vehicle mounting bracket and secure the unit with
screws (commercially available).
Use only the specified screws. Using wrong screws might damage
the unit.
Hook on the top side
Orientate the trim plate as
illustrated before fitting.
How to remove the unit
Do the required wiring.
( 30)
Dashboard of
your car
Bend the appropriate tabs to hold
the sleeve firmly in place.
Part list for installation
(A) Faceplate
(B) Trim plate
(C) Mounting sleeve
(D) Wiring harness
(E) Extraction key
ENGLISH
29
Publicité
