JVC KD-SR82BT Manuel D'instructions page 23

AUDIO SETTINGS
X ' OVER TYPE Caution: Adjust the volume before changing the X ' OVER TYPE to
avoid the sudden increase or decrease of the output level.
X ' OVER 2-WAY (Displayed only when [X ' OVER 3-WAY] is selected)
YES: Selects two way crossover type. ; NO: Cancels.
X ' OVER 3-WAY (Displayed only when [X ' OVER 2-WAY] is selected)
YES: Selects three way crossover type. ; NO: Cancels.
SND EFFECT
ENHANCE (Not applicable for TUNER source.)
SML/ MED/ LRG: Virtually enhances the sound space. ; OFF: Cancels.
RESPONSE LV1/ LV2/ LV3: Virtually makes the sound more realistic. ;
OFF: Cancels.
SOUND LIFT LV1/ LV2/ LV3: Virtually adjust the sound position heard from the
speakers. ; OFF: Cancels.
VOL LINK EQ ON: Boosts the frequency to reduce the noice heard from outside the
car or running noise of the tyres. ; OFF: Cancels.
K2 (Not applicable for TUNER source and AUX source.)
ON: Improve the sound quality of compressed music. ; OFF: Cancels.
Speaker output settings
(Only for X ' OVER 2-WAY)
Select the output setting for the speakers [SPK/PRE OUT], base on the
speaker connection method.
Connection via lineout terminals
For connections through an external amplifier.
Setting on
[SPK/PRE OUT]
REAR/REAR Front speakers output
REAR/SUB.W (default) Front speakers output
SUB.W/SUB.W Front speakers output
Connection via speaker leads
For connections without using an external amplifier. However, with this
settings you can also enjoy the subwoofer output.
Setting on
[SPK/PRE OUT]
REAR/REAR Rear speakers output
REAR/SUB.W Rear speakers output
SUB.W/SUB.W Subwoofer output
If [SUB.W/SUB.W] is selected:
– [FRQ 120HZ] is selected in [SUB.W LPF] and [THROUGH] is not available.
– [R02] is selected in [FADER] and selectable range is [R15] to [00].
( )
30
Audio signal through lineout terminal
FRONT REAR/SW
Rear speakers output
Subwoofer output
Subwoofer output
( )
30
Audio signal through rear speaker lead
L (left) R (right)
Rear speakers output
Rear speakers output
(Mute)
ENGLISH
19