Installing The Drip Guard; Adapting Device Settings - Seca 651 Mode D'emploi

5.9 Installing the drip guard

5.10 Adapting device settings

80 • seca 651/650
3. Plug the power supply unit into a power supply socket.
4. Perform a function check ➔
NOTICE!
Damage to device due to the ingress of fluids
Damage may occur to the device if dripping water or other fluids enter
the device via the connection panel.
► Only operate the device with the drip guard installed.
1. Connect all cables as described in these instructions for use and in the
installation instructions for the compatible products.
2. Position the drip guard on the connection panel as shown in the
illustration.
3. Push the drip guard beneath the weighing platform up to the stop.
You have the following options for setting the device up for different usage
situations:
• ➔
Changing the device mode, page 88
• ➔
Calling up/exiting a menu, page 89
• ➔
Setting up network functions, page 95
Function check, page 102.