Maintenance; Cleaning Pad; Fan, Sensors And Squeegees - ECOVACS ROBOTICS WINBOT 850 Mode D'emploi

Before performing cleaning and maintenance on WINBOT 8, Power OFF and unplug WINBOT 8
from the receptacle.

4.1 Cleaning Pad

Turn WINBOT 8 over and remove the Cleaning
Pad. Soak the Cleaning Pad in cool, clean
water for 2 minutes. Hand wash with mild
detergent and lay flat to dry. Allow it to dry
completely before re-attaching it to WINBOT 8.
* Do NOT use a wet Cleaning Pad on
WINBOT 8 or it may slip on the window.
* Washing the Cleaning Pad regularly can
extend its service life.
* If the Cleaning Pad becomes worn or no
longer fits exactly within the Velcro area,
replace it with a new one to achieve best
cleaning performance.

4.2 Fan, Sensors and Squeegees

Fan
Turn WINBOT 8 over and wipe any debris
from the Fan with the provided Finishing
Cloth to maintain suction.

4. Maintenance

Side Rollers
Wipe the four Side Rollers with the provided
Finishing Cloth to maintain their effectiveness.
15
EN