Table des Matières
Publicité
Names of Things and What They Do
Control panel
1
2
CHANNEL CONTROL
1
2
3
Level Knobs 1–3
These knobs adjust the volume of the devices connected to the
channels.
Turning the knob toward the right will increase the volume.
A microphone can be connected to CH 1.
If you connect a microphone, turn the knob to the range indicated as
MIC.
* If you're not using a channel, leave its level knob set to 0.
MASTER CONTROL
[EFFECT] Knob
4
The position of this knob lets you switch between three effects, and
adjust the effect depth.
REVERB:
This effect produces the reverberation of a concert hall.
It is a stereo reverb with a spacious feeling.
The position of the knob adjusts the volume of the reverb.
This is also ideal for a microphone connected to CH 1.
CHORUS:
This effect adds depth and spaciousness to the sound.
The position of the knob adjusts the depth of the effect.
This is particularly suitable for sounds such as strings.
WIDE:
This is a stereo chorus that processes the three frequency bands
independently, creating a spacious, embracing effect.
The low range remains firmly localized in the center, and the sound will
become more spacious as you go from the mid to the high range.
* The effect is not applied to the sound that's being input from AUX
IN jack.
6
3
4
5
6
7
8
5
6
Equalizer
This adjusts the tone of the speaker output and headphone output.
Normally, you should place these knobs at 0.
* These knobs do not affect the output from LINE OUT jack.
[LOW] Knob
This adjusts the tonal character of the low-frequency range.
[HIGH] Knob
This adjusts the tonal character of the high-frequency range.
7
VOLUME
[VOLUME] Knob
This adjusts the overall volume that is output by the KC-110's speakers.
If headphones are connected, this adjusts the headphone volume.
* The [VOLUME] knob does not affect the output from LINE OUT.
8
PHONES
PHONES Jack
You can connect stereo headphones to this jack.
* If headphones are connected, sound will not be output from the
speakers.
* You must set the [VOLUME] knob to 0 before connecting head-
phones.
9
POWER
[POWER] Switch
This turns the KC-110's power on/off (p. 5).
POWER Indicator
This will light when the power is on.
* The POWER indicator will become dim
when the batteries run low. If the batteries
become even lower, the POWER indicator
will blink.
Please replace the spent batteries with
fresh ones.
9
Headphone
POWER Indicator
Publicité
Table des Matières
