Publicité
Les langues disponibles
Les langues disponibles
2.
Loosen the thumb nuts and fold the upper handle.
2
Fig.37
► 1. Upper handle 2. Thumb nut
Removing or installing the mower
blade
WARNING:
Always remove the lock key and
battery cartridge when removing or installing the
blade. Failure to remove the lock key and battery
cartridge may cause a serious injury.
WARNING:
The blade coasts for a few sec-
onds after releasing the switch. Do not start any
operation until the blade comes to a complete
stop.
WARNING:
Always wear gloves when han-
dling the blade.
2
Removing the mower blade
1.
Put the mower on its side so that the mowing
height adjusting lever comes to the upper side.
2.
To lock the blade, insert a lumber or similar into
1
the mower.
3.
Turn the bolt counterclockwise with the wrench.
Fig.38
► 1. Mower blade 2. Wrench 3. Lumber
4.
Remove the bolt, washer, mower blade in order.
Fig.39
► 1. Mower blade 2. Washer 3. Bolt
Installing the mower blade
To install the mower blade, take the removal procedure
in reverse.
WARNING:
It has a top/bottom facing. Place the blade so that
the rotational direction arrow faces outward.
WARNING:
to secure the blade.
WARNING:
and all the fixing parts are installed correctly and
tightened securely.
WARNING:
always follow the instructions provided in this
manual.
16 ENGLISH
1
Install the mower blade carefully.
Tighten the bolt clockwise firmly
Make sure that the mower blade
When you replace the blades,
2
3
1
2
3
Publicité
