Checking Propeller - Yamaha 115C Manuel D'utilisation

NOTE:
If any operation is abnormal, consult a
Yamaha dealer.
Recommended fluid; Yamaha power
trim & tilt fluid or ATF (DEXRON-II).
EML08210

CHECKING PROPELLER

w
You could be seriously injured if the
engine accidentally starts while you are
near the propeller.
8 Before
installing the propeller, remove the
spark plug caps from the spark plugs.
210012
Also, put the shift control in Neutral,
put the main switch in the OFF position
and remove the key, and remove the
lanyard from the engine stop switch.
Turn off the battery cut-off switch if
your boat has one.
8 Do not use your hand to hold the pro-
peller when loosening or tightening the
propeller nut. Put a wood block
between the cavitation plate and the
602051
propeller to prevent the propeller from
turning.
1) Check each of the propeller blades for
wear, erosion from cavitation or ven-
tilation, or other damage.
2) Check the splines for wear and dam-
age.
3) Check for fish line winding around the
propeller shaft. Check the propeller
shaft oil seal for damage.
602054
4-19
inspecting, removing
GB
or