Beta 1942A Notice D'utilisation Et Instructions page 9

PERSONAL PROTECTIVE EQUIPMENT TO WEAR WHILE OPERATING AIR SAW
Failure to observe the following warnings may result in physical injury and/or disease.
ALWAYS WEAR HEARING PROTECTION WHILE OPERATING AIR SAW
ALWAYS WEAR EYE PROTECTION WHILE OPERATING AIR SAW OR PERFORMING
MAINTENANCE JOBS
ALWAYS WEAR PROTECTIVE GLOVES AGAINST PHYSICAL AGENTS WHILE OPERATING AIR
SAW
ALWAYS WEAR SAFETY SHOES
Additional personal protective equipment to wear according to the values found in the environmental hygiene/risk analysis survey if
the values exceed the limits under current regulations.
WEAR ANTI-VIBRATION GLOVES WHILE OPERATING AIR SAW FOLLOWING A SPECIALLY
CONDUCTED SURVEY OF LEVEL OF DAILY EXPOSURE OF HAND-ARM SYSTEM TO VIBRATION
WEAR PROTECTIVE MASK AGAINST PHYSICAL AGENTS
PRODUCT SPECIFICATIONS
STROKES PER MINUTE
STROKE LENGTH
CUTTING CAPACITY
AIR INLET
MAXIMUM PRESSURE
MINIMUM INTERNAL HOSE SIZE (Ø)
MAXIMUM AIR CONSUMPTION
WEIGHT
LENGTH
SOUND PRESSURE LEVEL
SOUND POWER LEVEL
VIBRATION LEVEL
KEY TO SYMBOLS
a: air saw blade
b: hexagon driver, 3 mm
c: air saw start lever
d: safety lever
e: air inlet 1/4 " GAS
f: oil lubrication
9500
10 mm
3,2 mm (iron)
1/4" GAS
6.2 bars
8 mm
75 l/min
0.5 kg
185 mm
79 dB(A) (EN ISO 15744)
90 dB(A) (EN ISO 15744)
2
8.63 m/s (ISO 28927-2)