Télécharger Imprimer la page

Schellenberg ROLLODRIVE 65 STANDARD Mode D'emploi page 16

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 21
ments or lack of experience and knowledge, provided that they are supervised
or have been instructed in safe use of the device and know the risks involved�
Cleaning and maintenance must not be carried out by children unless they are
supervised�
Children must not be allowed to play with the roller shutter drive�
CE DECLARATION AND CONFORMITY
The belt winder (Item no
ments of European and national regulations� Conformity has been demonstrated�
The full EU Declaration of Conformity document can be found at: http://www�
schellenberg.de (under 'Download-Center', in the 'Service' tab).
Machinery Directive
2006/42/EC
Do not dispose of together with household waste� The product is recyc-
lable and can be deposited at a recycling center or a collection station
for electrical household garbage�
INTENDED USE
This product (Item no. 22765 / 22726) is intended exclusively for the operation of
belt-driven roller shutter systems� For this, the roller shutter system must comply
with the technical requirements of the product�
Any other or further utilization beyond the explicitly specified shall be regarded
as not intended use�
Alfred Schellenberg GmbH shall not be liable for any consequential damage,
property damage and personal injury due to improper use�
According to EN 13659, it must be ensured that the displacement requirements
as per EN 12045 are met for the hanging material� When unrolled, the displace-
ment at the lower edge must be at least 40 mm at an upward-directed force of
150 N� It must be ensured that the travel speed of the hanging must be less than
0�2 m/s in the last 0�4 m�
The roller shutter system and its parts must be in a perfect condition� Defects in
the system or its parts must be repaired before installing the product�
An easily accessible 230 V / 50 Hz mains socket outlet must be available at the
place of installation (see page 229).
The installation surface where the product is to be installed must be level and
suitable�
22765,
22726) meets the applicable require-
DE
EMC Directive
2014/42/EU
16
RoHS Directive
2011/65/EU

Publicité

loading

Produits Connexes pour Schellenberg ROLLODRIVE 65 STANDARD