Steelcase Migration SE Guide Rapide page 18

4 Operating and adjusting
Releasing the control panel before the process is
completed will interrupt the manual resetting
process and it must be started anew.
Resetting to factory settings
This function can be used to reset the system to the factory
settings.
EN
18
1. Search for the control unit to reset it.
2. Briefly press the "Down" button three times (then
release it again):
3. Simultaneously press the "Up" and "Down"
buttons:
4. Wait 5 seconds: then press and hold the "Up"
button until the green light goes out.
ü The system has now been reset to the factory
settings.