Steelcase Migration SE Guide Rapide page 13

4 Operating and adjusting
4.1 Safety instructions
The Migration SE may only be used and operated in perfect
technical condition and in compliance with the user guide.
Before adjusting the height of the desk, ensure that:
■
The desktop is level. If the desktop is not level, check
first that floor is even. In the case of uneven floor,
adjust the height using the adjusting screws on the
feet. If the desktop is still not level, it is necessary to
perform a Manual Reset of Desktop:
■
No people or objects (e.g. open doors or windows)
are in the lifting range, or protrude into in the lifting
range.
■
No one is on the desk.
■
The maximum permissible desk load-carrying
capacity is not exceeded.
CAUTION
Crushing or tripping hazard at the Migration
SE Fence!
Risk of minor injury or material damage.
}
Carefully open and close the fence.
}
Carefully step over fence feet.
}
Do not store any objects in the fence.
}
For the Up/Down control panel, refer to
Up/Down control panel on page 16
}
For the Memory control panel, refer to Memory
control panel on page 19
4 Operating and adjusting
EN
13