Abicor Binzel BRS-CC Mode D'emploi page 32

EN Translation of the original German operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes and amendments to these
operating instructions as become necessary due to misprints, inaccuracies or product enhancements. Such changes will,
however, be incorporated into subsequent editions of the operating instructions.
All brand names and trademarks that appear in these operating instructions are the property of their respective
owners/manufacturers.
Our latest product documents as well as all contact details for the ABICOR BINZEL national subsidiaries and partners
worldwide can be found on our website at www.binzel-abicor.com
1 Identification
1.1 Marking
1.2 EU declaration of conformity
2 Safety
2.1 Designated use
2.2 Obligations of the operator
2.3 Personal protective equipment (PPE)
2.4 Classification of the warnings
2.5 Warning and notice signs
2.6 Emergency information
3 Product description
3.1 Technical data
3.2 Abbreviations
3.3 Nameplate
3.4 Signs and symbols used
4 Scope of delivery
4.1 Transport
4.2 Storage
5 Functional description
6 Commissioning
6.1 Transport and installation
6.2 Establishing the electrical connection
6.3 Connecting the pneumatic system
6.4 Cleaning station sub-assembly
6.5 Injection unit sub-assembly
6.5.1 Replacing the rubber seal of the cover
on the injection unit
6.5.2 Injection unit tactile valve
6.5.3 Adjusting the anti-spatter fluid
6.6 Wire cutting (DAV) sub-assembly
6.7 Installing or replacing equipment parts
6.7.1 Securing the clamping prism
6.7.2 Mounting the reamer
6.8 Approaching the clamping position
6.9 Setting up the pneumatic motor
EN - 2
EN-3 7 Operation
EN-3 7.1 Functional test
EN-3 7.2 Program start
EN-4 8 Decommissioning
EN-4
EN-4 9 Maintenance and cleaning
EN-4 9.1 Maintenance intervals
EN-4 9.2 Replacing the DAV cutter
EN-5
EN-5 10 Troubleshooting
10.1 Cleaning unit
EN-6 10.2 TSi injection unit
EN-6 10.3 DAV wire cutter
EN-8
EN-8 11 Disassembly
EN-9
12 Disposal
EN-9 12.1 Materials
EN-9 12.2 Consumables
EN-9 12.3 Packaging
EN-10 13 Appendix
13.1 Circuit diagram
EN-10 13.2 Pneumatic Plan
EN-10 13.3 Flow chart
EN-11
EN-11
EN-12
EN-13
EN-14
EN-15
EN-16
EN-18
EN-19
EN-19
EN-19
EN-20
EN-21
BRS-CC
EN-22
EN-22
EN-22
EN-23
EN-23
EN-24
EN-24
EN-24
EN-25
EN-25
EN-26
EN-26
EN-27
EN-27
EN-27
EN-27
EN-28
EN-28
EN-29
EN-30
BAL.0109 • 2020-12-15