Publicité
Les langues disponibles
Les langues disponibles
•
Press
. Indicators
flashing of the indicator
•
Press
to change the setting. Each time you press the button, the level increases. After level 10 you
will start again from level 1.
•
Turn the knob to
ADDING SALT
Before first use put one litre of water in the salt container.
Water and salt can come out from the salt container when you fill it. Risk of corrosion. To prevent it, after
you fill the salt container, start a programme.
ADDING RINSE AID
The rinse aid helps to dry the dishes without streaks and stains. It is automatically released during the hot
rinse phase.
DAILY USE
1. Open the water tap.
2. Set the correct programme for the type of load
and the degree of soil.
Make sure that the appliance is in Programme
selection mode.
•
If the salt indicator is on, fill the salt
container.
8
,
and
flash. The current setting is indicated by the intermittent
: e.g. 5 intermittent flashes + pause + 5 intermittent flashes = level 5.
to confirm the setting.
2
1
•
If the rinse aid indicator is on, fill the rinse
aid dispenser.
3. Load the baskets.
4. Add the detergent.
5. Start the programme.
1
2
Publicité
