Télécharger Imprimer la page

Beko HCA62541W Mode D'emploi page 12

Masquer les pouces Voir aussi pour HCA62541W:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 106
3
Operation of the Appliance
The hood has a remote control (only selected models) (Fig. 4)
Fig. 4 Remote control
Upper part of remote
control
3.4 Remote control operation
The turbine operation is
controlled with the upper part
of the remote control, marked
as
turbine is done by pressing the
button with the symbol
Inceasing speed is done by pressing the button
, reducing it by pressing the button
3.5 Lighting control via remote
control
buttons
and
are disabled.
3.6 Methods of reducing the
effect of cooking process on
the environment
To reduce Energy consumption, cook with using
covers on kitchenware.
• Aluminum filters must be kept clean
(recommended length of aluminum filter
operation between cleanings is max. 35h of
12 / EN
. Enabling/ disabling the
but also
and
.
The lighting is controlled
with the bottom part of
the
remote
control,
marked as
. Enabling/
disabling the light is done
by pressing the button
with the symbol
. The
Bottom part of remote control
hood operation).
• Take care of permeability of the ventilation
pipes.
• The operation level of the turbine when cooking
shall be always set to a minimum gear, which
will allow removing the fumes at the current
intensity of cooking
3.7 Replacing of lighting
Prior to any work related to the replacement of
lighting, be sure to unplug the power supply. If
the hood was previously enabled, you should wait
until the light bulbs are cooled, after which you
can proceed with the replacement. The process
of exchanging the bulbs is shown in Fig. 5.
A
Before replacing the light bulbs,
disconnect the power supply of the
hood.
A
Do not touch the light bulbs when
they are hot.
A
Be careful not to touch the replaced
light bulb directly with hands.
Hood / User Manual

Publicité

loading

Ce manuel est également adapté pour:

Hca62541bhHca62541b