Technical Data - INTEGRA Metering AMFLO SONIC UFA-280 Instructions De Montage Et Mode D'emploi

Technical data

Transmitter
Description
Enclosure
Ambient temperature
Storage temperature
Installation
Mechanical vibration
Design
Power supply
Battery change interval
Display
Push button
Measuring function
Communication
Digital output
Pulse output A
Pulse output B
Pulse width
Max. pulse frequency
Volume units
Flow units
Alarm codes
Cable length
EMC
Weight
Sensor
MID: minimum temperature 15°C (59°F)
1)
Beschreibung
Pipe design
Nominal size
Pressure rate
Pipe material
Transducer design
Transducer material
Media temperature
MID: environment class -10°C...+55°C (14°F....131°F)
2
* Waste industrial batteries are accepted back by the producer or importer, who has originally marketed the battery, or by the produ-
cer or importer, where the new industrial battery is purchased.
34
Specification
IP67 according to EN 60529 and DIN 40050 (NEMA 4X/6)
0 °C ...60 °C (32 °F.... 140 °F)
-35 °C...85 °C (-40 °F...185 °F)
Cable max. 5, 10, 20, 30 m (16.4, 33, 65, 90 ft) from sensor
2 g, 1...800 Hz sinusoidal in all directions to IEC 68-2-6
Fibre glass reinforced polyamide in light-gray color
• Battery: replaceable 3.6 V LiSOCl (Lithium Thionyl Chloride)
battery pack 32 Ah
• Mains: 87 ... 265 V AC (50 ... 60 Hz)
6 years at 60 °C (140 °F) operation
LCD, 8 digits, additional 2 digits and symbols for status information
One push button for toggling between display information
0.5 Hz battery mode or 20 Hz mains-powered
IrDA on display panel (MODBUS RTU protocol);
separate add-on serial interface moduls RS232 or RS485
(also MODBUS RTU protocol)
Two passive, galvanically isolated open drain-mos outputs A and B
Max. ±35 V, 50 mA
Preset to pulse output for forward flow
Preset to alarm for present failure
5, 10, 20, 50, 100, 200, 500 ms
100 Hz
m
3
m /h (default)
3
Track 1, 2 measuring, internal failure, battery low, flow overload,
pulse output frequency overload
Max. 30 meter between transmitter and pipe (factory sets: 5, 10, 20, 30 m)
Emission EN 61000-6-4
Immunity EN 61000-6-2
Transmitter: 1.5 kg (3 lb)
Technische Daten
2-track sensor with flanges and integrated transducers wet-calibrated from factory
DN 50, 65, 80, 100, 125, 150, 200, 250, 300, 350, 400, 500, 600, 700, 800, 900, 1000,
1200
PN 16, PN 25, PN 40, EN 1092-1
DN 50 ... 80: Bronze
DN 100 ... 1200: Carbon Steel EN 1.0345 / p235 GH, painted in light-gray
DN 50 ... 80: Mounted in sensor.
DN 100 ... 1200: Integrated version welded onto pipe.
Stainless steel (AISI 316 / 1.4404) / brass (CuZn36Pb2As)
Compact: DN 50 ... 1200: 2 ... 120 °C (35.6 ... 248 °F)
Remote: DN 50 ... 80: 2 ... 150 °C (35.6 ... 302 °F)
DN 100 ... 1200: 2 ... 200 °C (35.6 ... 392 °F)
2)
1)
1)
1)
AMFLO SONIC UFA-280
®