GE HPS16BTNRWW Manuel Du Propriétaire Et Instructions D'installation page 17

Installation Instructions
REVERSING THE DOOR SWING (Cont.)
REVERSING THE DOOR
5
HANDLES
5.1. Remove handle screws from the top of fresh
food door. Remove handle screws from the
5.2. Remove door handle on fresh food door
by sliding the handle up off of the fastener
(Plastic Handle) or plastic bushing (Stainless
Steel Handle). Remove door handle on
of the fastener (Plastic Handle) or plastic
bushing (Stainless Steel Handle).
5.3. Change places between the handle fastener
or plastic bushing and plug button on door
front.
5.4. Move the plug buttons on top and front of the
door to fill the now vacant holes.
5.5. Transfer the door stop on the bottom of the
door.
5.6. Attach handle to fresh food door by sliding
handle down onto fastener (Plastic Handle)
or plastic bushing (Stainless Steel handle)
and with screws at top of handle.
handle up onto fastener (Plastic Handle) or
plastic bushing (Stainless Steel handle) and
with screws at bottom of handle.
handle.
49-1000478 Rev. 5
Stop
RE-HANGING THE DOORS
6
6.1 Re-hang the fresh food door
6.1.1 Lower the fresh food door onto the
bottom hinge pin. Be sure the washer is
in place on the pin.
Hinge
Pin
6.1.2 Tilt the door towards the cabinet. As
the door is brought into position, align
the socket in the door with the hole
in the center hinge. Place the center
hinge pin into the hole in the center
hinge and tighten. Make sure the
washer is on the top of the hinge pin.
Hinge
Pin with
Washer
Center
Hinge
Plastic
Washer
17