Publicité
Les langues disponibles
Les langues disponibles
Before commissioning
Unloading
Release the star grips for the push han-
dle fastening.
Swivel the push handle backwards and
tighten the star grips.
Use the long boards on the sides of the
packaging as a ramp by placing them
against the pallet.
Fix the ramp to the pallet with nails.
Place short boards underneath the ramp
to act as a support.
Remove the wooden bars in front of the
wheels.
Push the appliance down the ramp from
the pallet.
Installing the Brushes
The brushes must be installed before the in-
itial operation (see "Maintenance works").
Installing the Vacuum Bar
Insert the vacuum bar into the vacuum
bar suspension in such a manner that
the profiled sheet is positioned above the
suspension. Tighten the wing nuts.
Insert the suction hose.
Operation
Warning!
Risk of damage. Raise the vacuum bar be-
fore reversing.
8
English
Note
To deactivate the brush drive immediately,
release the control handle.
Filling in Detergents
Warning
Risk of damage. Only use the recommended
detergents. With respect to different deter-
gents the operator bears the increased risk
regarding the operational safety and danger
of accident. Only use detergents that are
free from solvents, hydrochloric acid and hy-
drofluoric acid.
Note
Do not use highly foaming detergents. Ob-
serve the dosing notes.
Recommended detergents:
Application
Routine cleaning of all wa-
ter resistant floors
Routine cleaning of glossy
surfaces (e.g. granite)
Routine cleaning and ba-
sic cleaning of industrial
floors
Routine cleaning and ba-
sic cleaning of fine stone-
ware tiles
Routine cleaning of tiles in
sanitary areas
Cleaning and desinfection
in sanitary areas
Removal of coating from
all alkali-resistant floors
(e.g. PVC)
Removal of coating from li-
noleum floors
Open the cover of the fresh water reser-
voir.
Fill in the water detergent mixture up to
the MAX marking of the filling level dis-
Detergent
RM 745 RM
746
RM 755 es
RM 69
RM 753
RM 751
RM 732
RM 752
RM 754
Publicité
