Télécharger Imprimer la page

Milwaukee M18 FUEL 2712-20 Manuel De L'utilisateur page 3

Perceuses à percussion sds plus de 25 mm (1")
Masquer les pouces Voir aussi pour M18 FUEL 2712-20:

Publicité

Les langues disponibles

Les langues disponibles

unpredictable behavior resulting in fire, explosion or
risk of injury.
• Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or temperature
above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions. Charging im-
properly or at temperatures outside the specified range
may damage the battery and increase the risk of fire.
SERVICE
• Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES FOR
ROTARY HAMMER
• Wear ear protectors. Exposure to noise can cause
hearing loss.
• Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
• Hold power tools by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring. Cutting ac-
cessory contacting a "live" wire may make exposed
metal parts of the power tool "live" and could give the
operator an electric shock.
• Keep hands away from all cutting edges and mov-
ing parts.
To reduce the risk of injury, wear a
WARNING
dust mask or use an OSHA compli-
ant dust extraction solution when working in dusty
situations. Dust particles can harm your lungs.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing, contact
a MILWAUKEE service facility for a free replacement.
Some dust created by power sanding,
WARNING
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
filter out microscopic particles.
SYMBOLOGY
Volts
Direct Current
No Load Revolutions per Minute (RPM)
BPM
Blows per Minute (BPM)
Anti-vibration System
UL Listing for Canada and U.S.
US
C
SPÉCIFICATIONS
Cat. No. ..................................................... 2712-20
Volts.............................................................. 18 DC
Battery Type .................................................M18™
Charger Type................................................M18™
No Load RPM ............................................ 0 - 1400
No Load BPM ............................................ 0 - 4900
Type ......................................................... SDS Plus
Capacities
Drill Only*
Steel ............................................................ 1/2"
Wood ........................................................ 1-1/8"
Rotary Hammer (Concrete)
Carbide Tipped Percussion Bit ........................ 1"
Core Bit...................................................... 2-1/2"
Recommended Ambient
Operating Temperature ......................0°F to 125°F
*Requires chuck adapter kit Cat. No. 48-66-1370
FUNCTIONAL DESCRIPTION
5
4
3
2
6
1
10
1. Side handle
2. Clamping lever
3. Depth gauge rod
4. SDS Plus bit holder
5. Release collar
ASSEMBLY
Recharge only with the charger
WARNING
specified for the battery. For spe-
cific charging instructions, read the operator's
manual supplied with your charger and battery.
Removing/Inserting the Battery
To remove the battery, push in the release buttons
and pull the battery pack away from the tool.
Always remove battery pack before
WARNING
changing or removing accessories.
To insert the battery, slide the pack into the body
of the tool. Make sure it latches securely into place.
Only use accessories specifically
WARNING
recommended for this tool. Others
may be hazardous.
To reduce the risk of injury, always use a side
handle when using this tool. Always brace or
hold securely.
Adjusting the Side Handle Position
1. Loosen the side handle by unscrewing the side
handle grip until the side handle rotates freely.
2. Rotate the side handle to the desired position.
3. Tighten the side handle grip securely.
3
7
8
6. Mode selector
7. Trigger
8. Control switch
9. Handle
10. Dust Extractor
connection
9

Publicité

loading