Publicité
Les langues disponibles
Les langues disponibles
User level:
The message "Input user level" will be displayed. The user can modify the user code to a personal code
(default "1234"). The code must consist of 4 characters and must be confirmed with the # button. The
user will be directed to the previous menu with a correct input.
Submenu 2 - Code
This menu will not be used.
Submenu 3 - Report
Arm report:
A report is sent to the central unit.
No report:
No report is sent to the central unit.
Submenu 4 - Delay
This menu will be used to program the time needed for the alarm system to activate from the time the
user engages the system (in AWAY mode only). This delay will give the user enough time to leave the
secured zones before the alarm is triggered.
Time setting from 0 ~ 99 seconds
Example:
In this example, the delay has been set to 8 seconds in which the user will leave the secured zones
before triggering the alarm. The unit will emit a beep every second. Note that the delay time always
consists of 2 digits. Confirm with the # button.
"Zone" Menu
In the "Zone" menu each alarm zone (zone 01-12) can be separately assigned to a specific alarm type or
deactivate an alarm zone. Enter the zone number. The message "Input arm zone" will be displayed. The
entered value must be between 01 and 12. Confirm with the # button.
Remark: The first 4 zones (arm zone 1 - arm zone 4) are assigned to the sensors connected to terminals
5 ~ 8. The wireless sensors (included) are assigned to zones 5 ~ 12.
Next, choose between 4 different alarm types for each zone.
HAM06WS_v2
1,Arm report
2,No report
0
8
Input arm zone
1.Instant
3.24Hr
Input delay
**
#
**
2.delay
4.bypass
7
VELLEMAN
Publicité
