Publicité
FUNCTION OF STEERING RATE LEVER
You can adjust the maximum rudder angle of the steering servo to
STRATE
ensure optimum running of your model.
HT
maximum angle
FUNCTIONS OF THROTTLE TRIM LEVER
Trim function
When operating this lever without holding the trigger, you can
adjust the neutral position or the position where the speed
controler is in the stop mode. As the position changes you will
hear 2 clicking sounds which signify each movement.
Forward and reverse angle adjustment function(Throttle ATV)
Hold the trigger to the forward position or reverse at maximum
and then release it to the stop position. Operate this lever to adjust
the limits of the servo movement in each direction.
DIRECTION CHANGE OF SERVO ROTATION(Servo Reverse)
Operate this lever to set lowest tolerance levels of the steering and
throttle when adjusting ATV. Keep pressing the lever without
changing numbers, the LCD screen will show "NOR-REV". Under
this condition the servo will reverse its direction of travel.
BATTERY ALARM
When the battery voltage bocomes low during operating, LCD
screen will flash and an alarm sounds. When this happens, please
change the batteries to new ones. The alarm will continue to sound
if you don't change the batteries.
Publicité
