Agilent Technologies X3500-64000 Mode D'emploi page 289

Figure 52
Side Mounting
The L-shaped bracket (P/N X3500-68012) is available as an option.
NOTE
See the following figure.
1
2
3
4
5
6
TwisTorr 304 FS User Manual / 87-901-027-01(B)
TwisTorr 304 FS On-board Controller Installation
Mounting 1
Screw the 4 fixing studs (provided with the accessories bag) in
the holes on the L-shaped bracket;
Place the controller on the studs aligning the 4 rubber holes on
the top of the controller;
Press the controller towards the bracket;
Turn the pump upside-down;
Place the bracket on the pump bottom;
Screw a little bit the three screws M4 in the holes on the pump
bottom;
Technical Information
289/304
17