OVE LEA 60 Manuel D'installation page 10

1. Insert the fixed panel (C) into the metal track (B). Do not fully tighten it as further adjustments may be required.
Note: The wall track (B) allows you to adjust the position of the fixed glass panel (C). Adjusting the depth and/
or giving the fixed glass panel a slight angle allows for precise alignment with the door.
2. Install fixed glass panel (C) and door panel (D) with the 2 hinges (K). Use a ratchet to strongly tighten the bolts.
3. Insert the fixed panel vertical seal strip (L) into the fixed panel (C). Cut the surplus part to avoid overlapping the
bottom strip of the fixed panel.
4. Insert the 2 magnetic door seal strips (J) on the door panel (D) and the track (E).
5-6. Using a cutter, cut the surplus part of the door panel's bottom seal strip (F) that is located on the fixed panel side.
Insert the door panel's bottom seal strip (F) into the door panel (D).
7. Mark the position of the track (E).
1
B
C
3
C
L
5
GLASS PANEL INSTALLATION
F
6
D
10
2
C
D
K
4
J
E
D
7
E