Bibby Scientific Stuart SA6 Manuel D'utilisation page 4

Troubleshooting
Vortex action
Partially working
(stops in between).
Not working at all
(completely stopped).
Continuously working
(running without
being pressed).
Note: Please contact your recognised Bibby Scientific service representative if you continue to
experience issues with your Stuart Mini Vortex Mixer.
Warranty
Bibby Scientific Ltd warrants this instrument to
be free from defects in material and
workmanship, when used under normal
laboratory conditions, for a period of three (3)
years. In the event of a justified claim Bibby
Scientific will replace any defective component or
replace the unit free of charge.
This warranty does NOT apply if damage is
caused by fire, accident, misuse, neglect,
incorrect adjustment or repair, damage caused by
incorrect installation, adaptation, modification,
fitting of non approved parts or repair by
unauthorised personnel.
4
Problem
Small bottom screw
might have loosened.
Small bottom screw
might have become
loose.
Small bottom screw
might have been
overtightened.
Solution
Tighten the small bottom
screw a little
(½ or 1 turn max.).
Tighten the small screw
on bottom screw a little
(1 or 2 turns max.).
Loosen the small bottom
screw a bit
(1 or 2 turns max.).
Troubleshooting
Small bottom
Small bottom
screw at the base
screw at the
of device
base of device
Note: Please contact your recog
continue to experience issues w
Warranty
Bibby Scientific Ltd warrants thi
workmanship, when used unde
years. In the event of a justified
component or replace the unit f
This warranty does NOT apply if
incorrect adjustment or repair, d
modification, fitting of non app
Technical Specification
Type of Movement
Shaker Diameter
Tube Diameter
Permissible Shaking Weight
Maximum Speed
Variable Speed
Operation Type
Dimensions (L x W x H)
Weight
Vo
Par
(sto
No
(co
sto
Co
wo
wit
pre