Electrical Installation - Bibby Scientific Stuart SA6 Manuel D'utilisation

English
Speed knob
Figure 1: SA6 Variable Speed Vortex Mixer
Thank you for purchasing this Bibby
Scientific product. To get the best
performance from the equipment, and for
your personal safety, please read these
instructions carefully before use.
This equipment is designed to operate under the
following conditions:
 For indoor use only
 Use in a well ventilated area
 Ambient temperature range +5ºC to +40ºC
 Altitude to 2000m
 Relative humidity not exceeding 80%
 Mains supply fluctuations not exceeding 10%
 Over-voltage category II IEC60364-4-443
 Pollution degree 2 IEC664.
 Use with a minimum distance all round of
200mm from walls or other items.
If the equipment is not used in the manner
described in this manual, the protection provided
by the equipment may be impaired.
2

Electrical Installation

THIS EQUIPMENT MUST BE EARTHED
Before connection please ensure that the
line supply corresponds to that shown on
the rating label.
Power requirements:
Model Wattage
SA6 14W
Select the correct plug attachment and attach to
the power supply unit as shown below. Plug the
power supply plug into the mains supply socket.
IF IN DOUBT CONSULT A QUALIFIED
ELECTRICIAN
Rubber cup
Die cast base