Siemens TE809 Serie Mode D'emploi page 11

● The appliance is ready for use when the
symbols for the drink selection and the
start button 8 light up in the display 5.
Espresso
Info: The factory settings of the fully auto-
matic espresso machine are programmed
for optimal performance. The appliance
switches off automatically after a specific
time (see "Menu settings – Auto off after").
Note: If the appliance is being used for the
first time, the service programme has been
run, or the appliance has not been oper-
ated for a long period, the first beverage will
not have the full aroma and should not be
consumed.
When the fully automatic espresso machine
is first used, you will achieve a suitably thick
and stable "crema" only after the first few
cups have been dispensed.
All manuals and user guides at all-guides.com
Controls
Power on/off switch O / I
The power on/off switch 1 O / I is used
to switch the appliance on or off. The
appliance rinses automatically when it is
switched on and off.
The appliance will not rinse if:
● it is still warm when switched on.
● there was no coffee drawn before
The appliance is ready for use when the
symbols for the drink selection and the start
button 8 light up in the display 5.
Customising button
The appliance provides the option of saving
and calling up customised settings for
coffee drinks. Please refer to the section
"Customising" for information on how to
save and call up these settings.
Service programmes button
Press the
selection of service programmes. Please
run the programme as described in "Service
Programmes".
Press and hold to activate or deactivate the
child-proof lock, see "Child-proof lock".
Rotary knob
Turn the rotary knob 6 to the left or right to
navigate through the display 5, or to adjust
parameters in the menu.
Selection buttons
Press the selection buttons 4
navigate up and down through the menu
levels (navigation line 5c).
switching off.
á
à
button 3 briefly to call up the
<
and
en
à
>
< >
and to
7