Publicité
Torque
Before you start the fitting you must check the type plate to determine
which sketch, in the fitting instruction, is applicable.
1. M8x25 (10.9)
*******M* E: 25 Nm
2. M10x45 (10.9)
*******M* E: 75 Nm
3. M8 (10)
*******M* E: 30 Nm
4. M10x45 (10.9)
*******M* E: 45 Nm
5. M12x30 (10.9)
*******M* E: 75 Nm
6. M12x22 (100)
*******M* E: 160 Nm
7. M6x20 (10.9)
*******M* E: 20 Nm
*******M* P: 25 Nm
*******M* P: 72 Nm
*******M* P: 30 Nm
*******M* P: 45 Nm
*******M* P: 75 Nm
*******M* P: 150 Nm
*******M* P: 20 Nm
© 4001770/07-06-2022/7
Publicité
