Publicité
Les langues disponibles
Les langues disponibles
I
J
K
L
• Place the drip tray underneath and unscrew the drain
cap (G).
• Remove the small white lid and place the large white
lid (= funnel) on the boiler inlet (H).
• Remove the water fi lter and fi ll the reservoir to MAX
with HOT water from the tap.
• Attach the reservoir and allow the water to fl ow
through.
• Remove the water reservoir, the large white lid and
the drip tray and refi t the two caps.
• Fill the cold water reservoir using the fi lter and refi t.
Maintenance
Danger: Switch off appliance. Remove
plug from mains. Warning: Never use
decalcifi er or other chemical products.
To extend the service life of the appliance, use AQUA
fi lter granules. Available in specialised shops or from
www.laurastar.com (I).
• The granules must be changed
once they become COMPLETELY
brown (J).
• Clean the cold water reservoir.
Clean by hand or in the dishwasher.
• Clean the soleplate. To clean, use a POLYFER abra-
sive mat (available from your LAURASTAR dealer or
from www.laurastar.com) cloth in accordance with the
instruction manual. Clean soleplate more often when
using starch (K).
• Clean the outside of the appliance. Clean using a soft,
damp cloth. Do not use oil or petrol. Slight discolouring
and warping of the plastic possible due to normal wear
of the iron (L).
Stubborn stains can be removed using a pan scrub.
- 25 -
EN
Publicité
