Publicité
Les langues disponibles
Les langues disponibles
6. Installation instructions
•
A separate connection cable is necessary for the installation. Make sure that the connection cable
complies with the system dimensioning.
•
Use
the included connectors for installation.
•
Alternatively you can route the supply cable directly to the charging station.
•
If the charging station will be connected to the internet, first connect the Ethernet cable to the RJ45
connector and then the supply conductors to the power terminals.
6.1. Connection cable
Connector
17 mm
* The length is for the longest conductor. Cut the other conductors to applicable lengths.
** Leave the ground conductor long enough so that if a fault occurs it is the last one that comes loose.
For more detailed wiring instructions please see the charging station's Installation Manual.
28 / 52
900 mm
650 mm *
LERAK136-FRENIT/20230502
50 mm
200 mm **
Charging
station
11 mm
Publicité
