5.2. Cable entries
•
Open cable entries on the rear of the charging station to route electrical cables to the charging station.
Disassemble the charger
Remove the screws 5pcs.
4
Remove the installation box from the base.
Base
TX20
Tightening torque 1,5 Nm
24 / 52
Installation box
Screw fixing: Remove the screws 2pcs.
1
Mechanical lock: Unlock the hatch with a coin or suchlike.
LERAK136-FRENIT/20230502
3
Remove the screws 4pcs.
2
Remove the installation box cover.
Installation
box cover
Remove the screws
2pcs.