Publicité
Les langues disponibles
Les langues disponibles
• Do not operate the product
unless the blade and all
covers are attached correctly.
An incorrectly attached blade
can come loose and cause
personal injury.
• Make sure that the blade
does not hit objects such as
stones and roots. This can do
damage to the blade and bend
the motor shaft. A bent axle
causes heavy vibration and a
very high risk that the blade
becomes loose.
• If the blade hits an object
or if vibrations occur, stop
the product immediately. Stop
the motor, pull up the safety
key and remove the battery.
Examine the product for
damages. Repair damages or
let an authorised service agent
do the repair.
• Never attach the motor brake
handle permanently to the
handle when the motor is
started.
• Put the product on a stable,
flat surface and start it. Make
sure that the blade does not
hit the ground or other objects.
• Always stay behind the
product when you operate it.
• Let all the wheels stay on
the ground and keep 2 hands
on the handle when you
16
operate the product. Keep
your hands and feet away
from the rotating blades.
• Do not tilt the product when
the motor is started.
• Be careful when you pull the
product rearward.
• Never lift up the product when
the motor is started. If you
must lift the product, first stop
the motor, pull up the safety
key and remove the battery.
• Do not walk rearward when
you operate the product.
• Stop the motor when you
move across areas without
grass, for example paths
made of gravel, stone and
asphalt.
• Do not run with the product
when the motor is started.
Always walk when you operate
the product.
• Stop the motor before you
change the cutting height.
Never make adjustments with
the motor started.
• Never let the product stay
out of view with the motor
started. Stop the motor and
make sure that the cutting
equipment does not rotate.
1630 - 005 - 07.07.2023
Publicité
