Victoria Arduino FUKSAS THERESIA Mode D'emploi page 60

CLEAN WARNING
Through the CURSOR
the "Clean warning" submenu.
Press the ENTER
clean warning parameter setting. In-
crease or reduce the value through the
CURSOR keys.
By setting these values, the machine sig-
nals when reaching the cycle set number
or the operating hours, in order to carry
out cleaning when set.
Press the ENTER key to confirm.
WARNING
By setting to 0 the "Cycle number" and
"Operating hours", THE ALARM IS NOT
SHOWN.
Press the EXIT key to exit the menu.
When reaching the "Cycle number" or
60
All manuals and user guides at all-guides.com
keys, select
45
key to access group
46
"Operating hours" set, the display shows:
ON/OFF PROGRAMMING
It is possible to set the machine switch-
ing on/off hour for every day of the week.
Through the CURSOR
the "Program. ON-OFF" submenu.
Press the ENTER
machine automatic switching on/off set-
tings. Set day, hour and/or weekly rest
day through the CURSOR
and press the ENTER
EN
47
keys, select
48
key to access the
keys
key to confirm.
49