Victoria Arduino FUKSAS THERESIA Mode D'emploi page 51

EN
6. USE
Before starting any operation, the opera-
tor must be sure to have read and under-
stood the safety prescriptions contained
in this booklet.
The model
equipped with an User's visualization key
and a Technician key. The User's visual-
ization key allows to access the normal
operating functions and to visualize the
programming menus (Chapter 7).
The Technician's key allows to access all
particular functions and to modify the
parameters.
6.1 TURNING THE MACHINE
ON
Switch off the disconnector and set
the main switch A to I.
The information about the software
and the machine status are shown on
the display.
NOTE
The machine is not operative as the main
switch only supplies the electronic card.
All manuals and user guides at all-guides.com
is
A
12
WARNING
In case of electronic card maintenance,
turn the machine off by means of the ex-
ternal main switch or unplug it.
6.2 FIRST INSTALLATION
PROCEDURE AND MANUAL
WATER FILLING IN THE
TANK
When commissioning the machine for
the first time or after carrying mainte-
nance switch ON the machine using the
main switch positioned lower down and
on the right and proceed as follows:
When starting the machine, the
display shows the software release:
When starting the machine for the
first time, the display shows as
follows:
Press the ON/OFF
the machines. The display shows as
follows:
13
14
button to start
51