Publicité
Les langues disponibles
Les langues disponibles
EN
19. When setting it up, the licensed
electrician will have to check an omni-
polar switch is provided by the actual
safety
regulations
distance from the contacts which is
the same or higher than 3 mm.
20. To avoid dangerous overheating, do
not uncoil the supply cable to its full
length.
21. Do not obstruct the ventilation and/
or energy-dissipating grids, especially
in the cup warmer.
22. The power cable is not to be replaced
by the user. In case of damage,
switch the machine off and contact
exclusively professionally qualified
personnel for replacement.
23. In the event this kind of machine is
used no longer, it is recommended
to make it inoperative by unplugging
the socket, and then to cut the supply
cable.
POLLUTION DANGER
24. Do not dispose of the machine in the
environment: for waste disposal,
contact a specialized authorized center
or contact the manufacturer that will
give you information about this.
25. To support the aeration of the
machine, place it with a distance of
15 cm from the walls or from other
machines.
BURN HAZARD
26. Handle the vapor spear with care
when using it, do not put hands under
it and avoid to touch it immediately
after use.
27. Before carrying out any operation of
installation, maintenance, download,
or setting, the qualified operator
must wear working gloves and safety
shoes.
28. The maximum noise disturbance
level is lower than 70db.
All manuals and user guides at all-guides.com
with
opening
29. In case the hydraulic system pipe is
replaced, never use it again.
WARNING
INFORMATION TO USERS
Pursuant to Art. 13 of the Leg-
islative Decree dated 25th
July 2005, No. 151 "Imple-
mentation of the 2002/95/EC,
2002/96/EC, and 2003/108/
EC on the restriction of the use of certain
hazardous substances in Electrical and
Electronic Equipment as well as on waste
disposal".
The symbol of the crossed large rubbish
container that is present on the machine
points out that the product at the end of
its life cycle must be collected separately
from the other wastes. The user for this
reason will have to give the equipment
that got to its life cycle to the suitable
separate waste collection centers of elec-
tronic and electrotechnical wastes, or to
give it back to the seller or dealer when
buying a new equipment of equivalent
type, in terms of one to one. The suitable
separate waste collection for the follow-
ing sending of the disused equipment to
recycling, the dealing or handling and
compatible environment disposal con-
tributes to avoid possible negative ef-
fects on the environment and on the peo-
ple's health and helps the recycling of the
materials the machine is composed of.
The user's illegal disposal of the product
implies the application of administrative
fines as stated in Law Decree n.22/1997"
(article 50 and followings of the Law De-
cree n.22/1997).
43
Publicité
