Rola 59798 Instructions De Montage page 6

Please read all instructions carefully before assembly, installation and/or use of this product.
Read, understand and follow all warnings and instructions before using this product. Failure to follow these directions
may result in property damage, serious bodily injury, and/or death. Cequent Performance Products is not responsible
for any property damage, personal injury, or death occurred while using any Rola products. Retain these instructions
for future reference.
• DO NOT EXCEED the lower of Truck Rack rating, Roof Rack rating, vehicle manufacturer's weight rating or vehicle
manufacturer's specified load capacity for rail mounted accessories.
• Load is to be evenly distributed across the rack. "Distributed load" is defined as a load that is not concentrated in a
small area.
• Any load carried above the bed rails will increase your truck's center of gravity and will significantly hinder your
trucks ability to maneuver, stop, turn or accelerate. Avoid sharp turns and excessive speeds as this will increase risks.
• This truck rack is solely intended for, and only safe for, transporting ladders, lumber, pipe and other similar
materials or recreational items such as canoes and kayaks.
• Ladder damage will occur from road shock and vehicle vibration if the ladder is not properly secured to the rack.
The bouncing side to side motion of an improperly secured ladder will cause wear and weaken the ladder. Using a
damaged ladder could lead to a structural collapse and could result in a serious injury or death.
• Any modification or unintended use of this product voids any warranty and could create a hazardous condition
that may result in property damage, serious bodily injury and/or death. The sole exception being permanent
mounting within the prescribed method.
• Always secure long loads to front and rear of vehicle for safe transport.
• Do not use in truck beds that have excessive rust as it may decrease the capacity and result in product and/or bed
failure.
• Truck beds with liners may require modification prior to use of the product.
• The installation and use of any rail mounted accessory may cause minor aesthetic damage to the vehicle exterior.
Cequent Performance Products makes no claims or warrantees whatsoever as to a particular vehicle's ability to
support rail mounted accessories without incurring damage.
• Loads that exceed the vehicle manufacturer cargo and / or entire gross vehicle weight rating (GVWR), are not
covered by this warranty.
• Consult and follow your vehicle manual for capacity ratings.
• Always evenly distribute load on rack before driving.
• Loads must be secure according to local height and identification regulations and or laws.
• Secured loads and connections must be re-checked periodically for tightness.
• Overloading the vehicles GVWR may cause damage and severely alter the vehicle's handling and braking
characteristics and or cause the vehicle to roll over.
• It is recommended the tailgate be in the up position during use to better stabilize the truck bed.
• Always obey posted speed limits and traffic cautions.
• Lubricate with an anti-seize lubricant for best long term performance of stainless steel hardware.
• Failure to follow these warnings or instructions will void the warranty.
• Some vehicle manufacturers require a reinforcing kit. Contact your dealership for details.
• The Rola Top Rail Kit is based on vehicle design available at the version of these instructions. The Rola Top Rail Kit
is designed to fit a variety of bed lengths and cab designs.
Cequent Performance Products, Inc.
Plymouth, MI 48170
Technical Service: (888) 521-0510
All manuals and user guides at all-guides.com
CAUTION!
WARNING!
IMPORTANT!
Page 6 of 6
Product Name:
Product Code:
TOP RAIL KIT
59798
59798N Rev D 5-26-15
Printed in China