Leister WELDPLAST S2 Instructions D'utilisation page 17

Conformity
Leister Technologies AG, Galileo-Strasse 10, CH-6056 Kaegiswil/Switzerland confirms that this product in the
version put into circulation by us, fulfils the requirements of the following EC directives.
Directives:
Harmonised standards:
Kaegiswil, 28.11.2011
Disposal
Power tools, accessories and packaging should be recycled. For EU countries only: do not dispose
of power tools in your household rubbish! According to the European Directive 2002/96 on waste
electrical and electric equipment and its implementation in national law, power tools which can no
longer be used must be collected separately and recycled.
Technical Data
Voltage
Power consumption
Frequency
Air volume (20°C)
Air temperature
Plasticizing temperature
Output (Ø 3 mm)
Output (Ø 4 mm)
Filler rod
Dimensions L × B × H
Weight
Conformity mark
Safety standard
Type of certification
Protection class I
* WELDPLAST S2-PVC
All manuals and user guides at all-guides.com
2006/42, 2004/108, 2006/95
EN 12100-1, EN 12100-2, EN 60204-1, EN 14121-1
EN 55014-1, EN 55014-2, EN 61000-6-2, EN 61000-3-2, EN 61000-3-3,
EN 50366, EN 62233, EN 60335-2-45
Bruno von Wyl, CTO
V~ 230
W 3000
Hz 50/60
l/min 300
°C max. 350
°C max. 260
kg/h PE 0.6 –1.3 PP 0.5 –1.2 *PVC-U 0.9 –1.7 (average values at 50 Hz)
kg/h PE 1.0 – 2.3 PP 0.9 – 2.0 *PVC-U 1.5 –2.7 (average values at 50 Hz)
mm Ø 3 / Ø 4
mm 450 × 98 × 260 (without welding shoe)
kg 5.8 (without power cable)
2
3
CCA
1
Beat Mettler, COO
The right to make technical changes is reserved
17