Publicité
Les langues disponibles
Les langues disponibles
C
Note 1: You should not need to
tighten the union with a tool to achieve
water tight assembly. In case of a leak
use a spanner or a pair of pliers to
tighten the union.
Connection of Water Hose to
the Jug
(in some models)
To connect water to the refrigerator
from a jug, a pump is needed. Follow
the instructions below after connecting
one end of the water pipe coming
out of the pump to the refrigerator as
described on the previous page.
All manuals and user guides at all-guides.com
1. Finish the connection by pushing
2. Put and fix the pump hose into the
3. After completing the connection, plug
To provide an efficient operation of the
C
of the pump while making the water
connection.
14
EN
the other end of the water pipe into
the water pipe inlet of the pump as
shown in the figure.
jug as shown in the figure.
in and run the pump.
pump, wait for 2-3 minutes after
starting the pump.
You may refer to the user manual
Publicité
