Publicité
Les langues disponibles
Les langues disponibles
3
Installation
C
Please remember that the
manufacturer shall not be held liable if
the information given in the instruction
manual is not observed.
Points to be considered
when re-transporting your
refrigerator
1. Your refrigerator must be
emptied and cleaned prior to any
transportation.
2. Shelves, accessories, crisper and etc.
in your refrigerator must be fastened
securely by adhesive tape against any
jolt before repackaging.
3. Packaging must be tied with thick
tapes and strong ropes and the
rules of transportation printed on the
package must be followed.
C
Always remember...
Every recycled material is an
indispensable source for the nature
and for our national resources.
If you wish to contribute to recycling
the packaging materials, you can
get further information from the
environmental bodies or local
authorities.
Before operating your
refrigerator
Before starting to use your refrigerator
check the following:
1. Is the interior of the refrigerator dry
and can the air circulate freely in the
rear of it?
2. Insert the 2 plastic wedges onto the
rear ventilation cover as illustrated
in the following figure. To do this,
remove the screws on the product
and use the screws given in the same
pouch.
All manuals and user guides at all-guides.com
3. Clean the interior of the refrigerator as
4. Plug the refrigerator into the wall
5. You will hear a noise as the
6. Front edges of the refrigerator may
Electric connection
Connect your refrigerator to a grounded
9
EN
Plastic wedges will provide the
required distance between your
refrigerator and the wall in order to
allow the air circulation.
recommended in the "Maintenance
and cleaning" section.
outlet. When the door is open the
respective interior light will come on.
compressor starts up. The liquid and
gases sealed within the refrigeration
system may also give rise to noise,
even if the compressor is not running
and this is quite normal.
feel warm. This is normal. These
areas are designed to be warm to
avoid condensation.
socket which is being protected by a
fuse with the appropriate capacity.
Publicité
