Siemens EOX6021 FW CT9 Serie Manuel D'utilisation page 53

7.4 Performing initial start-up
After connecting the appliance to the
power supply, configure the settings
for initial start-up. Initial start-up only
appears when switching on for the
first time.
Open the appliance door.
1.
Set the mains switch to ⁠ .
2.
24
→ Fig.
Close the appliance door.
3.
Press to switch the appliance on
4.
and wait until the appliance has
rinsed.
Follow the instructions on the dis-
5.
play.
The display will guide you through
a
the programme.
Tip: To call up brief information,
press ⁠ .
Notes
If you want to set up Home Con-
¡
nect now, follow the instructions in
the Home Connect app.
→ "Setting up Home Connect",
Page 57
If "Demo mode" is selected, only
¡
the display screens will work. You
cannot dispense a beverage or run
a programme.
7.5 General information
Please bear this information in mind
so that you can get the best out of
your appliance.
Notes
The appliance has been pro-
¡
grammed at the factory with stand-
ard settings for optimum operation.
The integrated fan switches on
¡
each time a beverage is dispensed
and switches off again after
around 5-7 minutes.
The grinder has been factory-set
¡
for optimum operation. If coffee is
only dispensed drop by drop or is
too thin and with too little crema,
you can adjust the grinding level.
→ "Setting the grinding level",
Page 55
If you do not perform any actions
¡
on the appliance for a certain
period, it will switch off automatic-
ally. You can change the duration
in the basic settings. → Page 59
You can change the duration in the
basic settings.
The first beverage will not yet have
¡
its full aroma if:
– You are using the appliance for
the first time.
– You have run a service pro-
gramme.
– You have not used the appli-
ance for a long time.
Do not drink the beverage.
8 Basic operation
ope r a t i o n
ope r a t i o n
8.1 Switching the appliance
on or off
Notes
Do not press the power switch
¡
while the appliance is operating.
Before switching off the power
¡
switch, switch the appliance off
with . This is the only way for the
appliance to rinse automatically.
▶ Press ⁠ .
When the appliance switches on,
the display shows the logo. When
the appliance is switched on or off,
it will rinse itself automatically.
When switched off, the appliance
will emit steam into the drip tray for
cleaning. The appliance will not
rinse itself if the appliance is still
operation en
53