LG CBIH3013BE Manuel D'utilisation page 27

3
To cancel the timer setting, press the Timer
button.
WARNING
• The Timer function does not automatically turn
off the cooktop or cooking zones. Be sure to
press the POWER button to turn the cooktop off
after cooking.
Automatic Power Level Control
The power level displayed may be different from
the actual power level at the high end of the
temperature range. To prevent the cooktop from
overheating, the power level is controlled
automatically.
NOTE
• Power Cycling
- It is normal for heating elements to cycle On/
Off during use to control output power.
Cookware Heating Index
The cookware heating index can be used to
determine if a container will heat well on an
induction cooking zone.
• The heating index may vary due to conditions
such as voltage, cookware size, or cookware
temperature. Use cookware with a bottom
diameter that is suitable for the size of the
cooking zone.
• The heating index may vary depending on the
cooking zone.
• The cookware heating index displayed on this
product is based on internal manufacturer
standards. Environmental conditions may cause
inaccurate or variable results. Use the results
only as a reference point.
Using the Heating Index
1
Place the cookware on the cooking zone you
want to use and set the output level to 9.
2
Press and hold the corresponding cooking
zone button and Control Lock to display the
cookware heating index. The cookware
heating index turns off after 3 seconds.
Index
0 - 3
4 - 8
9 - 10
• The higher the index, the better the cookware
heats up (rated from 0 to 10).
• If the index is low, check the material, size and
shape of the cookware base.
- Even if the cookware has an IH mark, if the
index is low it may not heat properly on this
appliance.
OPERATION 27
Heating Status
Bad
Poor
Good