Publicité
Les langues disponibles
Les langues disponibles
Control Panel
Control Panel Features
Locations of Surface Elements and Controls
The position of the cooking zone being controlled is shown in each cooking zone icon on the control panel.
The diagram below is for the 36" cooktop. The 30" control panel only includes 4 cooking zone icons.
Throughout this manual, features and appearance may vary from your model.
Surface elements and controls
Press and hold for 1 second to turn
the entire cooktop ON. When it is
POWER
ON, the cooktop is in standby
a
mode until a cooking zone is
activated.
Press the Simmer key with the
Simmer
cooking zone selected to simmer
b
sauces or stews.
Sets the active cooking zone to
Pause
minimum output. Press to activate
c
or deactivate.
Connect the appliance to a home
Wi-Fi
d
Wi-Fi network.
Hot Surface Indicator
Hot surface indicator
• If this icon is displayed on the screen, be careful
because the ceramic glass surface is hot.
- Failure to take care may result in burns or
injuries.
Surface elements and controls
Control
Press and hold for 3 seconds to
e
Lock
lock the control panel.
Check the status of a cooking zone
Cooking
and adjust the cooking zone. For
f
Zone
details, see "Operating
Instructions".
Press to set a timer. For details,
Timer
g
see "Operating Instructions".
Power
Select the power level for the
h
Level
cooking zone.
• After you turn off the cooking zone, the icon is
displayed continuously until the ceramic glass
surface cools down.
- If the temperature near the product is high, it
may take longer for the ceramic glass surface
to cool down.
• Even after the indicator light has turned off, be
careful because the surface may still be hot.
OPERATION
21
Publicité
