Publicité
Les langues disponibles
Les langues disponibles
12 INSTALLATION
Preparing the Installation Location
Important Installation Information
• All electric cooktops run off a single phase, three-wire or four-wire cable, 240/208 volt, 60 hertz, AC-only
electrical supply with ground.
• Minimum distance between cooktop and overhead cabinetry is 30" (762 mm) for a 30" cooktop and 36"
(914 mm) for a 36" cooktop.
• Make sure the cabinets and wall coverings around the cooktop can withstand the temperatures (up to 93
℃ [200 ℉]) generated by the cooktop.
Dimensions and Clearances
Do not obstruct these areas.
a
Right side
b
Radius: 3/8" (10 mm)
c
4" X 8" (102 mm x 203 mm) opening to route armored cable if panel is present.
d
Approximate location of junction box
e
-
A
Width of upper plate
B
Depth of upper plate
Distance from bottom of upper plate to bottom of
C
conduit
D
Width of cooktop base
E
Depth of cooktop base
Distance from bottom of upper plate to bottom of
F
cooktop base
G
Height of conduit
Dimension/Clearance
30" Cooktop
30 11/16" (781 mm)
21 1/16" (534 mm)
3 9/16" (90 mm)
28 1/8" (714 mm)
18 13/16" (477 mm)
2 7/16" (61 mm)
1 1/8" (29 mm)
36" Cooktop
36 5/8" (930 mm)
33 1/2" (851 mm)
Publicité
