Product Description And Specifications; Intended Use; Product Features - Bosch GHG Professional 20-63 Notice Originale

12 | English
Do not aim the hot airflow at the same area for pro-
u
longed periods. Working with plastic, paint, varnish or
similar materials may produce easily flammable gases.
Please be aware that heat is directed to covered flam-
u
mable materials, which may ignite.
Safely place the power tool on the storage surfaces
u
after use and let it cool completely before packing it
away. The hot nozzle can cause damage.
Do not leave the switched-on power tool unattended.
u
Store idle power tools out of the reach of children. Do
u
not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
Do not expose the power tool to rain or wet condi-
u
tions. Water entering a power tool will increase the risk of
electric shock.
Do not misuse the cable, for example by using it to
u
carry, hang up or unplug the power tool. Keep the cable
away from heat and oil. Damaged or entangled cords in-
crease the risk of electric shock.
Always wear safety goggles. Safety goggles reduce the
u
risk of injury.
Pull the plug out of the socket before adjusting the
u
tool settings, changing accessories, or storing the
power tool. Such preventive safety measures reduce the
risk of starting the power tool accidentally.
Always check the power tool, cable and plug before
u
use. Stop using the power tool if you discover any
damage. Do not open the power tool yourself, and
have it repaired only by a qualified specialist using
only original replacement parts. Damaged power tools,
cables and plugs increase the risk of electric shock.
Keep your work area well-ventilated. The
gas and steam produced during work are often
harmful to one's health.
Wear protective gloves and do not touch the nozzle
u
while it is hot. There is a risk of burns.
Do not direct the airflow at persons or animals.
u
Do not use the power tool as a hair dryer. The outgoing
u
airflow is considerably hotter than that that of a hair
dryer.
Do not allow foreign objects to enter the power tool.
u
The distance between the nozzle and the workpiece
u
depends on the material you are working on (metal,
plastic, etc.) and the intended working method. Al-
ways test the amount of air and temperature first.
If operating the power tool in a damp location is un-
u
avoidable, use a residual current device (RCD) protec-
ted supply. Use of an RCD reduces the risk of electric
shock.
Never use the power tool if the cable is damaged. Do
u
not touch the damaged cable and pull out the mains
plug if the cable is damaged while working. Damaged
cables increase the risk of an electric shock.
1 609 92A 4UE | (04.02.2019)
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product Description and
Specifications
Please observe the illustrations at the beginning of this oper-
ating manual.

Intended Use

The power tool is intended for bending and welding plastic,
stripping coats of paint and heating shrink tubing. It is also
suitable for soldering and tinning, melting adhesive bonding
and thawing water pipes.
The power tool is intended to be operated by hand, under
supervision.

Product Features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Nozzle
(2) Heat shield, removable
(3) Storage surface
(4) On/off switch and power settings
(5) Memory preset
(6) Temperature
(7) Thermal protection shutdown
(8) Fan symbol
(9) Airflow
(10) Fan button
(11) Memory button
(12) +/– button
(13) Display
A)
(14) Surface nozzle
A)
(15) Glass protection nozzle
A)
(16) Angle nozzle
A)
(17) Reflector nozzle
A)
(18) Welding wire
A)
(19) Welding shoe
A)
(20) Reducing nozzle
A)
(21) Heat shrink plastic tube
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Bosch Power Tools