KERN MPN Serie Notice D'utilisation page 85

Delete pre-tare value:
• Unload the weighing plate and press
• Or after adjustment „ManuAL" press
, the pre-tare value is deleted.
8.3 HOLD function
The balance has an integrated standstill function (mean value calculation). With this
function it is possible to weigh people accurately even if they do not stand still on the
weighing plate.
(example)
TMPN_A-BAPS-def-2211
 Start balance by pressing
Wait for stability display
 Press , in the display „---------" will appear and the
„HOLD" symbol appears flashing.
 During this display place the person in the middle of the
weighing plate.
 As soon as the „HOLD"-symbol does not more flash and the
stability display
person will be displayed and „frozen".
After unloading the balance, the weighing value remains
displayed for approx. 10 seconds, the „HOLD" symbol
appears during that time.
Then the balance returns automatically into the weighing
mode.
The „HOLD" symbol goes out, and the zero display appears.
There is no average value calculation in the event of too much
movement.
, the balance goes to zero display.
, „cLEAr" appears. After that press
.
.
appears, the weighing value of the
29