DeWalt DCD991 Traduction De La Notice D'instructions Originale page 37

v
Only for indoor use.
x
Discard the battery pack with due care for
the environment.
y
Charge D WALT battery packs only with designated
e
D WALT chargers. Charging battery packs other than
e
the designated D
e
charger may make them burst or lead to other
dangerous situations.
z
Do not incinerate the battery pack.
B
USE (without transport cap). Example: Wh rating
indicates 108 Wh (1 battery with 108 Wh).
A
TRANSPORT (with built-in transport cap). Example: Wh
rating indicates 3 x 36 Wh (3 batteries of 36 Wh).
Battery Type
These battery packs may be used: DCB181, DCB182, DCB183,
DCB183B, DCB183G, DCB184, DCB184B, DCB184G, DCB185,
DCB187, DCB189, DCBP034, DCBP034G, DCBP518, DCBP518G,
DCB546, DCB547, DCB547G, DCB548, DCB549. Refer to
Technical Data for more information.
Package Contents
The package contains:
1 Brushless cordless drill/driver (DCD991)
or
1 Brushless cordless hammerdrill (DCD996)
1 Charger
1 Side handle
1 Magnetic bit holder (Optional accessory)
1 Belt hook (Optional accessory)
1 Li-Ion battery pack (C1, D1, E1, G1, H1, L1, M1, P1, Q1, S1, T1,
U1, X1, Y1, Z1 models)
2 Li-Ion battery packs (C2, D2, E2, G2, H2, L2, M2, P2, Q2, S2,
T2, U2, X2, Y2, Z2 models)
3 Li-Ion battery packs (C3, D3, E3, G3, H3, L3, M3, P3, Q3, S3,
T3, U3, X3, Y3, Z3 models)
1 Instruction manual
nOTE: Battery packs, chargers and kitboxes are not included
with N models. Battery packs and chargers are not included with
NT models. B models include Bluetooth® battery packs.
nOTE: The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth® SIG, Inc., and any use of
such marks by D WALT is under license. Other trademarks and
e
trade names are those of their respective owners.
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
WALT batteries with a D WALT
e
Markings on Tool
The following pictograms are shown on the tool:
a
Read instruction manual before use.
n
Visible radiation. Do not stare into light.
Date Code Position (Fig. B)
The production date code 16
by a 2-digit week and is extended by a 2-digit factory code.
Description (Fig. A, B)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
Components
Battery pack
1
Battery release button
2
Variable speed trigger switch
3
Forward/reverse control button
4
Torque adjustment collar
5
Keyless chuck
6
Chuck sleeve
7
Speed selector
8
Worklight
9
Worklight switch
10
Belt hook (Optional accessory)
11
Mounting screw
12
Bit holder (Optional accessory)
13
Side handle
14
Main handle
15
Date code position
16
Fuel gauge button
17
Low mode
18
Medium mode
19
Spotlight mode
20
Intended Use
These hammerdrills are designed for professional drilling,
percussion drilling and screwdriving applications.
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
These drills/drivers/hammerdrills are professional power tools.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
Young children and the infirm. This appliance is not
•
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
EnGLIsH
consists of a 4-digit year followed
35