Maintenance Schedule & Daily Check List - Joerns Oxford Ascend Manuel De L'utilisateur

English
10. Maintenance Schedule & Daily Check List
All Oxford products are designed for minimum maintenance, however some safety checks and
procedures are required. A schedule of DAILY tasks are detailed below. Daily checks and a six
monthly service, inspection and test will ensure a lift is kept in optimum safe working condition. A
list of spare parts is available upon request.
The LOAD TEST and certification should only be carried out by qualified personnel or an autho-
rised service agent / dealer.
DAILY CHECK LIST: Joerns Healthcare strongly recommends the following checks be carried
out on a daily basis and before using lift.
• MAKE SURE the lift moves freely on its castors.
• EXAMINE the spreader bar (cow horns) is firmly attached to the boom.
• EXAMINE the sling hooks and attachment clips on the spreader bar and boom for exces-
sive wear.
• MAKE SURE the legs open and close correctly.
• OPERATE the hand control to confirm the boom raises and lowers satisfactorily.
• CHECK the operation of the emergency stop button.
• EXAMINE slings for fraying or other damage. DO NOT use any sling if damaged or if the
sling shows signs of wear.
• CONFIRM the lift is not giving a low battery alarm when the hand control is
operated. If the alarm sounds, DO NOT use and place on charge immediately.
Maintenance, Inspection and Test
Joerns Healthcare recommend a thorough inspection and test of the Oxford Ascend lift and
lifting accessories, slings, scales etc is carried out on a regular basis. Inspection frequency
varies depending on locality, so you must check with your dealer or local government agency
as appropriate regarding how often an inspection is required. The examination and test should
be conducted according to the recommendations and procedures provided in this manual.
Joerns Healthcare recommends maintenance, inspection and certified testing is carried out by
authorised service agent / dealers only.
NOTE: These recommendations are in compliance with the requirements of 1998 No2307
Health and Safety: The Lifting Operations and Lifting Equipment Regulations 1998. This is a UK
regulation.
Outside the UK please check your local requirements.
Oxford
®
Ascend
21