Service & Maintenance; End Of Life Disposal - Joerns Oxford 4-Point Adaptive Power Cradle Manuel De L'utilisateur

English
7. Service and Maintenance
1. Check for freedom of rotation (power cradle)
2. Check for wear on the central pivot point (the pivot pin located in the
cradle frame)
3. Check for firm attachment to the boom of the lift
4. Check for wear of the boom and quick release pin on the lift
5. Check the actuator for correct operation listen for unusual noise
6. Lubricate the pivot joints, including boom and cradle
7. Inspect pivot joints, including boom and cradle for excessive wear.
Replace as required
8. Check power cable is firmly attached to the charger
Cleaning
Clean with ordinary soap and water and/or any hard surface disinfectant. Harsh chemical
cleaners or abrasives should be avoided as these may damage the surface finish of the product.
Avoid wetting any of the electrical parts. After cleaning, the unit should be thoroughly dried.

End of Life Disposal

Battery: All batteries in the product and any accompanying accessories must be recycled
separately. Batteries should be disposed of in accordance with local or national regulations.
Slings: Slings and associated material accessories should be sorted as combustible waste in
accordance with local or national regulations.
Oxford
Adaptive Power Cradle
ü ü
ü
ü ü
ü
ü ü
ü
®
ü
ü
ü
ü
ü
ü
ü
11