Abus TVIP41550 Guide De Démarrage Rapide page 9

4. Install your Camera in Ethernet network
1. Connect your Network Camera to the Ethernet network
All manuals and user guides at all-guides.com
2. Use Category 5 cable (CAT5)
to connect the camera to
from Ethernet port to hub/switch.
Please use CAT5 cross link cable when
the Network Camera is directly
connected to PC.
3. Connect power cord to a power outlet.
15
5. Connect to the camera
1. Please note the serial number on the product label.
The serial number is not the same as the
MAC address of the camera.
Example MAC:
0002D1000019 = 00-02-D1-00-00-19
2. Assign IP address
a) Run the „Installation Wizard 2" from the included software CD.
b) The software will search for installed Eyseo IP devices
on the same Local area network.
3. After searching the main installer window will pop up.
Click on the MAC that matches the one you just noted from the product label
of your device to connect the Internet Explorer to the camera.
ABUS Security-Center
www.abus-sc.com
TVIP41550
12VDC / max. 1.5A
S/N: xxxxxxxxxxxx
MAC: xxxxxxxxxxxx
4.The standard IP address of
the camera is:
169.254.0.99.
16