Télécharger Imprimer la page

Briggs & Stratton GenAlert Mode D'emploi page 5

Publicité

Les langues disponibles

Les langues disponibles

WARNING
The unit must be installed in accordance
to generally accepted low voltage wiring
techniques.
To prevent possible injury, always de-energize
the generator and transfer switch before making
connections to the generator.
IMPORTANT: Read the warranty information and the
FCC statement before using this product.
The performance of local and long distance telephone
lines vary and may affect operation of this equipment.
Therefore, it is important that this equipment be
fully tested after installation to confirm telephone
compatibility. Please see Testing your GenAlert in
Maintenance for complete instructions.
Special Installation Considerations:
This equipment requires a single line telephone,
but does not require this line to be dedicated for
its use.
You must have Touch-Tone® telephone service
for this equipment to properly operate.
This equipment will not work on pulse or rotary
dialing telephone systems.
This equipment may not be compatible with some
PBX (Private Branch eXchange ) or other multi-
line business telephone systems.
A dual plug adapter or "splitter" (not included),
is required only if you share the same phone line
through the connection of a single wall jack.
NOTICE: Connecting this equipment to a commercial
telephone system may cause internal damage to both
systems. This equipment can share a wall phone jack
with a telephone.
Get other manuals https://www.bkmanuals.com
3

Publicité

loading